Do you need any help with your order?
FREE SHIPPING ON ORDERS OVER $1,000!
This will work for our standard and folding windshields.
*READ INSTRUCTIONS THOROUGHLY BEFORE BEGINNING. OTR IS NOT RESPONSIBLE FOR INCORRECT INSTALLATION OR LOCAL LAWS REGARDING AFTERMARKET ACCESSORIES. THE USER IS RESPONSIBLE FOR ALL LIABILITIES ASSOCIATED WITH THE INSTALLATION AND USE OF THIS PRODUCT.
ALWAYS UTILIZE PERSONAL SAFETY EQUIPMENT WHEN YOU ARE WORKING IN THE SHOP.
Items you’ll need to supply:
Items included in hardware:
Plastic Windshield Tool (aka dog bone)
Start with the outside of the windshield facing you (hole closest to the edge on the right)
Next install the glass seal, you’ll need to put it on the windshield frame as shown, with lock strip facing out. (Note the narrow groove goes on the windshield frame, and the wider groove goes towards the glass.
Make sure to pull the corners as tight to the frame as possible. As shown below, leave about ¾”-1” extra after glass seal is around the windshield, and force the ends together
This will keep the rubber seal from shrinking and making a gap where the ends meet up. If the seal wrinkles a little don’t worry it will work out in the next step.
To put the glass in, spray the seal and glass with glass cleaner. This will make it easier to slide into place. Start with sliding glass into one bottom corner.
Take the supplied dog bone and slide it along the seal to spread it open and drop the glass into place. (we suggest you work from bottom corner, to bottom corner, then up the sides, and along the top)
Or option two you can use a lock strip tool.
Monday – Thursday
6:00 A.M. to 5:00 P.M.
Lunch from 12 P.M. to 1 P.M.
Westfab Custom
Fabrication, LLC
