FREE SHIPPING ON ORDERS OVER $1,000!
Side Step Install

Side Step Install

Tools Needed

  • Eye protection
  • Drill
  • Drill bit 21/64”
  • 1/2” wrenches
  1. Start by finding the one bolt hole that lines up at the front of the door opening where your shoulder netting anchor is bolted to the tub
  2. To position the step initially, reuse the door net anchor bolt located on the floor near the front of the door opening.
  3. Remove the nut and bolt and reuse it to hold/affix the step in place (see pic)

4. Use a drill and 21/64 drill bit to drill through the remaining holes.
5. Hardware is supplied for the remaining holes. Torque to 13-foot pounds.