Roxor Starter

This is a nice sealed upgrade from the factory unit for your Roxor.
Note (Manuals only)

Replacement for OEM Part: 0307CAB01711N
Aftermarket Starter Motor – Sealed
When installing only the top and bottom bolt holes will be used the starter motor will be outboard from the engine block

2022 and UP Roxor DIY Front Tube Fender Kit

OTR Weld-It-Yourself Tube Fenders for the Mahindra Roxor.

(Built To Order–Please allow 7-14 days to process the order)

This product requires fabrication skills. Requires cutting of the factory fenders.

SKU: RTF101-1

On The Rox in-house designed rear hub puller is a must on your ranch or in your shop when working on your rear axle. The cage is made from 1/4″ plate steel with a 3/8″ bottom plate and solid slug on top to hit with your sledgehammer including an 8 Ton (Tanya) bottle jack. Even […]

Yukon Standard Carrier Case 3.73 Down 19 Spline

Protected: Product List

There is no excerpt because this is a protected post.

Blogs

HOME BLOGS Blog Posts

Builds

HOME Blogs Custom Builds On the Rox Custom Builds

PARAGON 3000 Grease

Multi-purpose, high-quality lithium grease (NLGI #2) offers extreme anti-wear protection under heavy loads, shock conditions, and normal loads. Passes a full 100 lb. Timken test. Best choice for high-heat applications.

High-quality lithium grease (NLGI #2)
Extreme anti-wear protection under heavy load and shock conditions and normal loads. Passes a full 100 lb. Timken OK test
Wide temperature range. Pumps in hand-operated guns down to -5 degrees F. Dropping point of 630 degrees F
Extreme stability and consistency. Does not soften like some greases allowing leakage away from the area where the grease is needed
Moisture resistant. Resists being washed off by water and displaces water on metal surfaces. Pressure protection retained even in the presence of 20% water
Adhesive and Cohesive. Resists squeezing out and thinning under severe loads. Adhesive characteristics develop a dust shield to protect bearings
Multi-purpose grease ideal for a wide range of applications covering heat, moisture, load, impact and stability questions