For 2023 & Up Roxor Model
*READ INSTRUCTIONS THOROUGHLY BEFORE BEGINNING. OTR IS NOT RESPONSIBLE FOR INCORRECT INSTALLATION OR LOCAL LAWS REGARDING AFTERMARKET ACCESSORIES. THE USER IS RESPONSIBLE FOR ALL LIABILITIES ASSOCIATED WITH THE INSTALLATION AND USE OF THIS PRODUCT.
ALWAYS UTILIZE PERSONAL SAFETY EQUIPMENT WHEN YOU ARE WORKING IN THE SHOP.
- Materials Needed: 15-millimeter socket or wrench, and Marker
The Roxor is equipped with eight mounting points on the front of the frame, they only utilize four of them from the factory for the front bumper. Start with taking the bolts out and putting the d-rings on with just the four bolts supplied from the Roxor.
- Line up the d-ring mount and, mark out where to drill the other holes for the d-rings.
Remove bumper and drill a pilot hole where you marked.
Now use a 15/32” drill bit and drill your holes into the bumper
- Now put the bumper back on and mount the d-rings.
Chuck Norris would be PROUD!