FREE SHIPPING ON ORDERS OVER $1,000!

OTR Shackle Reversal Leveling Kit Installation

*Beginning note, our bolt hole specifications are tight. Die grinding powder coated bolt holes in our components may be necessary to install the bolts. *Trimming on the bottom lip of the factory front bumper is required for the Shackle Reversal Crossmember. *On the Rox Front bumper with receiver hitch will not clear the Shackle Reversal […]

2.5” Front Leaf Spring Leveling Kit Installation Guide

*READ INSTRUCTIONS THOROUGHLY BEFORE BEGINNING. OTR IS NOT RESPONSIBLE FOR INCORRECT INSTALLATION OR LOCAL LAWS REGARDING AFTERMARKET ACCESSORIES. THE USER IS RESPONSIBLE FOR ALL LIABILITIES ASSOCIATED WITH THE INSTALLATION AND USE OF THIS PRODUCT. ALWAYS UTILIZE PERSONAL SAFETY EQUIPMENT WHEN YOU ARE WORKING IN THE SHOP. DISCONNECT BATTERY BEFORE YOU BEGIN. *These instructions serve as […]

Heavy Duty Half Door Installation Guide

Contents: (6) 8mm x 20mm Stainless Steel Button Head Bolts (2) 8mm x 25mm Stainless Steel Button Head Bolts (2) M8 Flange Nuts (8) 8mm Stainless Steel Flat Washers (12) ⅜” x ¾” Stainless Steel Button Head Bolts (12) ⅜” Serrated Lock Nuts (4) ¼” Serrated Lock Nuts (4) Black Door Hinge Nuts – Installed […]

Rear Bumper Installation Guide

Hardware Contents: (8) 8mm Flange Head Bolt (4) 8mm Steel Lock Flange Head Bolt (2) 12mm Socket Cap Bolt (2) 12mm Flat Washer Not included only required for 2018-2019 Models You will need (1) 12mm-1.75 thread tap Begin by removing the factory rear end caps. Locate the 12mm-1.75 metric thread tap from the hardware. Use […]

OTR Roxor Rox Sliders Installation Guide

Rox Slider Kit for the Mahindra Roxor Includes: (14) 5/16” SS BH Bolts (10) 5/16” Serrated Flange Head Bolts (24) 5/16” Serrated Flange Lock Nuts Begin by removing Rox Sliders and hardware from packaging. Verify all the components listed above are there. Rox Sliders come bolted together for packaging, unbolt them and set on padded […]

OTR Rear Full Floater Kit Installation Guide

Rear full floater kit for the Mahindra Roxor Includes: Yukon 30 Spline Chromoly Axle Shafts Wheel Hubs Spindles Timken Bearing and Seal Kit Spindle Nut Kits Wheel Studs 27 Spline Drive Flanges Gaskets Caps Grade 8 Hardware Begin by safely lifting the Roxor up in the air with either a lift or safely set on […]

Standard Windshield Frame Installation Guide

*READ INSTRUCTIONS THOROUGHLY BEFORE BEGINNING. OTR IS NOT RESPONSIBLE FOR INCORRECT INSTALLATION OR LOCAL LAWS REGARDING AFTERMARKET ACCESSORIES. THE USER IS RESPONSIBLE FOR ALL LIABILITIES ASSOCIATED WITH THE INSTALLATION AND USE OF THIS PRODUCT. ALWAYS UTILIZE PERSONAL SAFETY EQUIPMENT WHEN YOU ARE WORKING IN THE SHOP. Included but not shown in the picture above, is […]

Oil Pan Skid Plate Armor Installation Guide

Begin by preparing and cleaning both mating surfaces, the oil pan skid plate, and the bottom of the oil pan. Sand the bottom of the oil pan down to bare metal with 36-40 grit sandpaper, and make sure there is no residue or dust left by wiping both surfaces with a wax and grease remover. […]

Roxor side steps in Black Powdercoat

Our OTR side steps are CNC cut and formed from 1/8″ hot rolled steel. They are a great addition to your Roxor making it easier to get in and out of. And feature punched serrated holes for traction. Includes 5/16″ fasteners with washers and serrated flange nuts.

Four-Seater Sport Top Black Powdercoat

Built-to-order allow 7 to 10 days for processing. On the Rox’s formed to fit roof skin. This aluminum top helps to seal up the windshield frame to the roll cage and provides some much-needed cover from the elements. The top has a lip on the front with a rubber seal that fits between or over either one of our windshield frames and roll cage, keeping rain and mud out. This is a two-piece design for easier installation. And attaches to the roll cage with (10) Allstar Tubing Clamps.  Powder coated in black.

Not compatible with OTR’s Full Cab (Requires Four-seater ROPs)