Tools Needed Drill Drill Bits 1/4”, 5/16” and 15/32” 7/16” wrench 5/32” Allen wrench Install Time: 45 minutes to 1 hour Measure from the inside edge of each hinge towards center of the vehicle 4.75 inches and then up towards the front of the vehicle 7.50 inches and drill a hole with the 5/16” drill […]
Install fuse panel on lower left lip of dash. Mount the included circuit breaker to the firewall above the battery. Be cautious of any wiring on the inside of the firewall that may be damaged when drilling or using sheet metal screws. Splice the thin red wire from the fuse panel into the pink with […]
Previous Next Install Time: 45 minutes Tips If you are having a hard time aligning the skid plate holes you can loosen the transmission cross member bolts on the frame to allow for adjustment. Tools Needed Floor Jack and Jack Stands Ratchet & 14mm Socket 14mm Wrench 17mm Socket 10×1.5mm Tap (included) Preparation Jack up […]
*READ INSTRUCTIONS THOROUGHLY BEFORE BEGINNING. OTR IS NOT RESPONSIBLE FOR INCORRECT INSTALLATION OR LOCAL LAWS REGARDING AFTERMARKET ACCESSORIES. THE USER IS RESPONSIBLE FOR ALL LIABILITIES ASSOCIATED WITH THE INSTALLATION AND USE OF THIS PRODUCT. ALWAYS UTILIZE PERSONAL SAFETY EQUIPMENT WHEN YOU ARE WORKING IN THE SHOP. DISCONNECT BATTERY BEFORE YOU BEGIN. Remove the factory tail […]
*READ INSTRUCTIONS THOROUGHLY BEFORE BEGINNING. OTR IS NOT RESPONSIBLE FOR INCORRECT INSTALLATION OR LOCAL LAWS REGARDING AFTERMARKET ACCESSORIES. THE USER IS RESPONSIBLE FOR ALL LIABILITIES ASSOCIATED WITH THE INSTALLATION AND USE OF THIS PRODUCT. ALWAYS UTILIZE PERSONAL SAFETY EQUIPMENT WHEN YOU ARE WORKING IN THE SHOP. DISCONNECT BATTERY BEFORE YOU BEGIN. Installing the Folding Windshield […]
This kit is designed for, and compatible with our Standard Windshield Frame and our Folding Windshield Frame. Note: This kit does not work with any Mahindra windshield frame. Contents: (1) Wiper motors and Wiring Harness (2) Windshield Wiper Arms (2) Windshield Wipers (2) Windshield Wiper Clip Kits (2) #10 Stainless Steel Button Head Bolts (2) […]
Contents: (6) 1.75” Roll Cage Clamps (16) ¼”-.20 x ½” Stainless Steel Button Head Bolts (2) ¼”-.20 x 3/4” Stainless Steel Button Head Bolts (6) Stainless Steel Flat Washers (2) Aluminum Mounting Spacers (1) 4’ Section of Rubber Seal Begin by installing the 4’ section of 3M Rubber seal on the inside of the front […]
*READ INSTRUCTIONS THOROUGHLY BEFORE BEGINNING. OTR IS NOT RESPONSIBLE FOR INCORRECT INSTALLATION OR LOCAL LAWS REGARDING AFTERMARKET ACCESSORIES. THE USER IS RESPONSIBLE FOR ALL LIABILITIES ASSOCIATED WITH THE INSTALLATION AND USE OF THIS PRODUCT. ALWAYS UTILIZE PERSONAL SAFETY EQUIPMENT WHEN YOU ARE WORKING IN THE SHOP. DISCONNECT BATTERY BEFORE YOU BEGIN. Remove the hood hold […]
*READ INSTRUCTIONS THOROUGHLY BEFORE BEGINNING. OTR IS NOT RESPONSIBLE FOR INCORRECT INSTALLATION OR LOCAL LAWS REGARDING AFTERMARKET ACCESSORIES. THE USER IS RESPONSIBLE FOR ALL LIABILITIES ASSOCIATED WITH THE INSTALLATION AND USE OF THIS PRODUCT. ALWAYS UTILIZE PERSONAL SAFETY EQUIPMENT WHEN YOU ARE WORKING IN THE SHOP. DISCONNECT BATTERY BEFORE YOU BEGIN. First, begin by removing […]
*READ INSTRUCTIONS THOROUGHLY BEFORE BEGINNING. OTR IS NOT RESPONSIBLE FOR INCORRECT INSTALLATION OR LOCAL LAWS REGARDING AFTERMARKET ACCESSORIES. THE USER IS RESPONSIBLE FOR ALL LIABILITIES ASSOCIATED WITH THE INSTALLATION AND USE OF THIS PRODUCT. ALWAYS UTILIZE PERSONAL SAFETY EQUIPMENT WHEN YOU ARE WORKING IN THE SHOP. DISCONNECT BATTERY BEFORE YOU BEGIN. IMPORTANT Disconnect the battery […]
Monday – Thursday
6:00 A.M. to 5:00 P.M.
Lunch from 12 P.M. to 1 P.M.
Westfab Custom
Fabrication, LLC